Lube Notes: Grease Lube for Your Vehicle

Volume 2 Issue 4 - Lubrication

Article Index
Lube Notes: Grease Lube for Your Vehicle
Grease Lube Composition
Grease Compatibility
All Pages

Lube NotesIn previous Lube Notes we looked at the role lubricants play in overcoming the effects of friction. In this installment, I want to examine one specialized type of lubricant: grease lube. Looking at previous civilizations, we can see that man has tried several methods to provide basic lubrication to load-bearing surfaces; axles have presented one of the most challenging applications. As far back as 1400 BC, mutton fat and beef tallow were used on chariot axles to reduce friction in order to allow for more speed and to slow down wear. One can only imagine the pressure on the maintenance men to make the chariot go faster and to avoid axles catching on fire from the continuous friction. While there is evidence of lime being added to these fats in order to make their lubricating properties last longer, few other improvements to the composition of grease are known to have been used until we reach the magic year of 1859.

What happened in 1859? Colonel Drake drilled the first ever oil well in Pennsylvania; since then, the world has not been the same. In petroleum oil, man found a lubricant that could be manipulated in a variety of ways to produce greases much superior to the lubricants that preceded them. In turn, more advanced and effective greases have been produced in recent decades with the advent of synthetic greases.

The word grease is derived from the Latin word crassus meaning fat. We can see where the name came from (mutton fat, beef tallow); however, grease lube, for modern purposes, is not to be construed as fat. The American Society for Testing Materials (ASTM) defined grease in 1916 as: A solid to semi-fluid product of dispersion of a thickening agent in a liquid lubricant. In plain English, this means A lubricant composed of lubricating fluids (oils), thickened by mixing chemicals to produce a semi-fluid to semi-solid consistency.

Now that we know a little of the history of grease and how grease is defined in modern lubrication; when, where and why is grease lube used? While lubricating oils are able to lubricate any friction-causing situation, greases offer unique characteristics that are well suited for:

  • Situations requiring less dripping or spattering of lubricant
  • Hard to lubricate bearings or joints where reducing frequency of lubrication is needed
  • In dirty, dusty or hazardous environments where additional sealing is needed to prevent lubricant contamination.
  • For intermittent operation. Oil drains away from critical bearings when the equipment is stopped but grease stays in place.

Banner


Grease Lube Composition

Greases are made from oil and thickeners (sometimes called soaps). The process is simple but the details are fairly complex. The lubricating oil can be petroleum or synthetic and can vary in viscosity. Additionally, anti-wear and extreme pressure additives can be added to formulate greases for specific applications, such as, high speed bearings, very cold or very hot conditions, open gears, extreme loads or high moisture conditions, to name a few. Oil and thickeners can be combined to offer greater temperature ranges and resistance to moisture. Thickeners can be combined or formulated with additional chemicals to produce more complex thickeners for specific applications.

Greases will vary in thickness depending on the amount and type of thickeners used as well as the viscosity of the lubricating oil used. The National Lubricating Grease Institute (NLGI) is the regulating body that establishes specific ratings for greases. Greases are rated on a hardness scale from 000 to 6; where 000 is a thick liquid, like pudding, and 6 is a block, similar to hard clay. Today, 000 grease lube is used as a replacement for gear lubes in bearings and differentials and number 6 grease is used where a rubbing action is needed to produce a light film on the surface to be lubricated. Wheel bearings and chassis greases used in auto and truck applications are usually NLGI #2. In very cold climates NLGI #1 grease is preferred because the grease will thicken in response to the temperatures. Synthetic greases thickened with appropriate compounds are functional over a wide temperature range, from minus 50ºF to 500ºF; petroleum greases are generally limited to 0°F to 300°F.

In 1991,the NLGI developed a classification system specifically targeting automotive greases (Table One). For the majority of readers, it is the appropriate rating system for your truck applications.


NLGI Classification System for Automotive Greases (Table One)

Application
NLGI
Service
Classification
Service Limitations
Chassis
LA
Mild duty, frequent re-lubrication
Chassis
LB
Infrequent re-lubrication, high loads, water exposure
Wheel Bearings
GA
Mild duty
Wheel Bearings
GB
Moderate duty, typical of most vehicles
Wheel Bearings
GC
Severe duty, high temperatures, frequent stop and go service

So when you are looking to purchase grease lube for your truck, look for grease labeled GC-LB: grease rated for severe duty for the wheel bearings as well as for the chassis. Multi-purpose grease is the correct match for heavy duty pickups. Synthetic greases, available from Amsoil and Mobil will provide the best protection over the widest temperature range. Also, using synthetic multipurpose grease negates the need to buy moly-fortified heavy duty grease. Moly (molybdenum disulfide) is added to grease to provide extreme pressure lubrication. I have explained the difference in extreme pressure lubrication vs standard lubrication regimes in an earlier issue of Lube Notes, so please refer to that issue for the specific explanation. There are no legitimate extreme pressure grease points on heavy duty pickups, so save the heavy duty grease for larger equipment.


Banner

If the grease will be exposed to water, either by submersion or by spray, using water resistant grease is the best choice. To be water resistant, the grease must pass additional testing that insures its ability to cling to a surface while being sprayed with a stream of water. Water resistant greases contain additional thickeners and tackifiers that allow them to resist washing out. Sometimes, these greases will be labeled “marine” but more and more they are simple referred to as water resistant.


Grease Compatibility

A word of caution; not all greases are compatible with each other. This problem occurs because some of the thickening agents chemically react with others, which can lead to the grease lube becoming very hard or liquefying or preventing the oil from leeching out to provide lubrication, essentially, rendering the grease useless. Most grease you find for automotive applications are lithium or lithium-complex greases: these are compatible with each other. Table Two (next page) covers compatibility/incompatibility of commonly-used greases. If you find grease that uses a different thickener than those listed, contact me to verify compatibility.


Compatibility / Incompatibility of Commonly Used greases (Table Two)

Table Two – Different types of grease lube are not always compatible with each other. For instance, the first two grease compounds, Aluminum Complex and Barium Complex are incompatible as indicated by the “I” inside a red box. A “C” inside a green box indicates that the two compounds are compatible with each other. A “B” in a yellow field indicates the two compounds possess only borderline compatibility.


Banner

Grease is the forgotten lubricant, it just doesn’t rise to the level of notice of other lubricants; however, grease lube is fundamental to proper care for your vehicle. For most auto or truck applications greasing should be done at three month intervals for petroleum and six month intervals for synthetics. Wheel bearings properly packed with synthetic grease are good for 10 years but the most convenient time for repacking is when the brakes are replaced. There are few manufacturers stipulating wheel bearing maintenance and some are now installing sealed bearings that cannot be greased. Ball joints and steering joints can still be greased in most heavy duty vehicles, but in light duty vehicles, the grease fittings may not be installed and you will have to purchase them and install them. As with all lubricants, synthetic greases outperform petroleum greases and the cost difference is actually in favor of the synthetics; you simply use less grease over time and the up front cost difference is minimal.

As always, call me with your questions at (800) 661-7242.

 

Trackback(0) trackbackTrackBack URI for this entry

Comments (2)add comment

Greg said:

0
What type grease is Amsoil?
Best article I've found on this, however where is Amsoil on the compatability chart, please?
 
November 05, 2010
Votes: +0

Jeffzx9 said:

0
Greg, check the thickener type
Greg, check the type of thickener used on the product detail sheet/page from any manufacturer. The same manufacturer may use different thickener base stock, so it depends on the specific product being used.
 
April 10, 2012
Votes: +0

Write comment

security image
Write the displayed characters


busy

Search

maxxTORQUE in Print

0204_cover_small
(Available through Amazon.com)

Follow us on Twitter

Login